2025 John Deere TerrainCut™ Rough 8800A

Information

2025 John Deere TerrainCut™ Rough 8800A

Trim & Surrounds Mower

TechControl™ Display locks in performance, and uptime

LoadMatch™ to maintain cut quality

27% more hp, 20 percent more torque in the mowing circuit

Final Tier 4 without sacrificing horsepower

Features may include:

  • Rotary decks feature rigid construction, rear discharge, double bearings, and high torque motors in one tough package
  • TechControl display maximizes performance and uptime by allowing more control in operation and diagnostics
  • eHydro™ hydrostatic pump and large-capacity wheel motors for serious hill-climbing capabilities
  • No-tool notch adjustment system makes height-of-cut changes a breeze
  • Standard GRIP all-wheel drive traction system provides superior traction by reducing wheel slip

Photos

Highlights

  • Rayville, Louisiana
  • 2025
  • John Deere
  • TerrainCut™ Rough 8800A
  • Diesel up to B20 compliant
  • Available
  • of cut: Construction 10 gauge 3.4 mm (0.1345 in.) / No tool adjustment 2.54-10.2 cm (1-4 in.)

Specifications

  • 2025
  • John Deere
  • TerrainCut™ Rough
  • 8800A
  • Rough Mowers
  • 2-stage dry element
  • Liquid centrifugal pump; forward machine location for optimum cooling
  • Four
  • 2.091 L (127.6 cu in.)
  • Direct Inject Turbocharged
  • Maximum rated horsepower At 2800 rpm ISOC: 41.1 kW (55.1 hp)
  • Tier 4
  • 25% load: 3.63 L/hr (0.96 gph) | 40% load: 5.64 L/hr (1.49 gph) | 50% load: 6.85 L/hr (1.81 gph)
  • Diesel up to B20 compliant
  • Electric Switch on Command Arm
  • Hydraulic power with dual rod, double acting steering cylinder | Tilt: Left Foot operated for easy adjustment
  • Automatic controls with AutoPedal foot controls; manual control through TechControl display
  • Cutting units drive: Direct-coupled hydraulic gear motor
  • Electric Switch on Command Arm for Internal Wet Disk Brakes
  • Electric Switch on Command Arm for Internal Wet Disk Brakes
  • 26x12-12 Multi Trac
  • Steering: 20x12X10-8 turf
  • 82.7-124 kPa (12-18 psi)
  • Forward/reverse: 2-pedal
  • Mowing: 0-12.8 km/h (0-8 mph) | Transport: 0-20.12 km/h (0-12.5 mph) | Reverse: 9.6 km/h (6 mph)
  • Frequency of clip (FOC Reels) or Blade tip speed (decks): 4572 m/min 15,000 fpm
  • Operator ear full engine: 91 dBA
  • Tandem gear pump
  • Rollers Rear: 7.6 cm (3 in) | Rollers Wide: 12.7 mm (5 in)
  • Total: 53.3 cm (21 in.)
  • of cut: Construction 10 gauge 3.4 mm (0.1345 in.) / No tool adjustment 2.54-10.2 cm (1-4 in.)
  • 3.38 m (133 in.)
  • 2.24 m (88 in.)
  • Front Two: 10.2 cm (4 in.)
  • Mowing: 2.23 m (88 in)
  • 2.21 m (87 in.)
  • System: 45.4 L (12 U.S. gal.)
  • 61.7 L (16 U.S. gal.)
  • Storage: Cup holder; two-way radio; large operator storage located on left hand side of operator station
  • Steel with front skid plate
  • Mower: One-touch single handle
  • Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
  • Two-year limited