2025 John Deere PrecisionCut™ 7700A

Information

2025 John Deere PrecisionCut™ 7700A

  • TechControl™ Display locks in performance, and uptime
  • Set mowing turn speed to reduce scuffing
  • AutoPedal™ lowers fuel consumption and noise
  • Final Tier 4 without sacrificing horsepower

Features may include:

QA7 electric reel drive system meets customer needs for reduced hydraulic leaks, sound levels, and fuel consumption
  • The electric reel design meets the largest customer needs:
  • Eliminating 90% of the chances of an unsightly, damaging hydraulic leak by removing 150 leak points from the reel drive circuit
  • Fuel Savings of up to 30% on the 7700A E-Cut™ Hybrid, and 21% on the 6700A E-Cut Hybrid, by mowing at reduced throttle minimizes operating costs
  • Sound level reduction of up to 3dB(A) when mowing at reduced throttle opens up the operating window by being more friendly to neighbors
56-Volt, 240 amp Smart alternator and electric reel motors provide power for mowing, verticutting, and scalping
  • An innovative 56-volt, 240-amp alternator provides plenty of power for mowing, as well as more rigorous applications of scalping for overseeding and verticutting up to 1/4” (6.35 mm) deep.
  • Belt driven from the engine, meaning no additional batteries required and less maintenance
  • Integrates with LoadMatch™ by sensing load on the mowing system, and slowing traction speed to maintain cut quality when heavy loads are encountered
  • To handle the toughest loads that often come with Quick-Adjust 7 (QA7) applications, the reel motors have been updated compared to the QA7 design. The QA7 motors feature longer cooling fins for optimal cooling, and a larger internal bearing design.
TechControl display maximizes performance and uptime by allowing more control in operation and diagnostics
  • More control with the TechControl display with a large easy-to-read screen
  • Passcode-protected TechControl display enables quickly setting or changing mowing speed, turning speed, or transport speed to limit variations in performance by different operators.
  • Quickly adjust the mow or transport speed to make sure mow speed is what is needed for the changing conditions. The setting can be adjusted precisely using a speedometer app on a smartphone or global positioning system (GPS) device.
  • Use the TechControl to slow the machine during turns while mowing and protect against turf scuffing and aggressive turning operators.
  • The turn speed control engages when in mow and the cutting units are lifted for turns. Once the turn is made and the cutting units are lowered, the machine speed returns to the set mow speed.
  • The turn speed is a percentage of mow speed. When set to 100 percent, turn speed control is off or allows 100 percent of the mow speed in turns. Turn speed setting of 50 percent allows only 50 percent of the set mow speed to be reached during turns.

Photos

Highlights

  • Rayville, Louisiana
  • 2025
  • John Deere
  • PrecisionCut™ 7700A
  • Diesel; up to B20 compliant
  • Available
  • Mowing position: 295 cm (116 in.)
  • with ROPS: 224 cm (88 in.) | of cut: Ten-blade QA7: 6.3-50.8 mm / Ten-blade QA7: 0.25-2.0 in. / Eight-blade QA7: 6.3-50.8 mm / Eight-blade QA7: 0.25-2.0 in.

Specifications

  • 2025
  • John Deere
  • PrecisionCut™
  • 7700A
  • Fairway Mowers
  • Liquid centrifugal pump; forward machine location for optimum cooling
  • Three
  • 1.568 L (95.69 cu in.)
  • Direct Inject Turbocharged
  • Maximum rated horsepower At 2800 rpm: 31 kW (41.6 hp)
  • United States and Canada Tier 4
  • 2-stage dry element
  • Actual Fuel usage will vary depending on course conditions, operation, turf and fuel quality: 25% load: 2.8 L/hr (0.75 gph) / 40% load: 4.32 L/hr (1.14 gph) / 50% load: 5.22 L/hr (1.38 gph)
  • Diesel; up to B20 compliant
  • Electric Switch on Command Arm
  • Forward/reverse: 2-pedal
  • Hydraulic power with double acting steering cylinder | tilt: Left Foot operated for easy adjustment
  • Automatic controls with AutoPedal foot controls; manual control through TechControl display
  • Internal hydraulic wet disc brakes with dynamic braking through closed loop hydrostatic system
  • Electric Switch on Command Arm for Internal Wet Disk Brakes
  • Front drive: 26.5x14-12 turf
  • Steering: 20x12X10-8 turf
  • 69 kPa (10 psi)
  • Ground speed: Mowing 0 to 12.8 km/h (0 to 8.0 mph) / Transport: 0-18.5 km/h (0-11.5 mph) / Reverse: 0-6.4 km/h (0-5 mph) | Frequency of clip (FOC Reels) OR Blade tip speed (decks): 10 Blade: 1.06 mm/km/h / 10 Blade: 0.067 in./mph / 8 Blade: 1.33 mm/km/h / 8 Blade: 0.084 in./mph
  • Drive: Tandem gear pump
  • Quick Adjust QA5: 55.9 cm (22 in.) | Frequency of clip (FOC Reels) OR Blade tip speed (decks) Rollers Front and rear: 7.6 mm (3 in.) | Reel diameter: 17.8 cm (7 in.)
  • Total: 254 cm (100 in.)
  • with ROPS: 224 cm (88 in.) | of cut: Ten-blade QA7: 6.3-50.8 mm / Ten-blade QA7: 0.25-2.0 in. / Eight-blade QA7: 6.3-50.8 mm / Eight-blade QA7: 0.25-2.0 in.
  • 323 cm (127 in.)
  • Mowing position: 295 cm (116 in.)
  • 287 cm (113 in.)
  • 37.8 L (10 U.S. gal.)
  • 60.6 L (16 U.S. gal.)
  • Cutting units lowered: 1202 kg (2650 lb)
  • Operator display: TechControl Display; Located on Command Arm; displays machine warnings, on-board electrical diagnostics; service timers on large easy to read screen; quick on the go settings for mow and transport speed; Turn Speed; Loadmatch™ and ON/OFF Cruise Control Use selection: all settings are pass code protected | Storage: Cup holder; two-way radio; large operator storage located on left hand side of operator station | Cutting Units number: five
  • Mower: One-touch single handle
  • Suspension seat with seat belts and arm rest; fore/aft adjustment; weight and lumbar adjustment
  • Two-year limited