2019 Bigham Culti-Lister Model 889

2019 Bigham Culti-Lister Model 889

The Model 889 Culti-Lister gives you consistent beds across the field. With a parallel-link gang that conforms to your field like your planter units, you’ll get identical beds from one pass to the next.

A vibrant mix of attachments and ground-engaging tools fit this machine to your farming practices.

Plus, a few simple changes turns this machine into a high-speed cultivator or irrigation water furrow maintainer for different times of the year.

• Parallel linkage incorporates polymer bushings that never need greasing.

• Height adjustable front tooling.

• Selection of rear tooling.

• Exclusive rigid shank with foot piece. Holds our buster or bedding sweep firmly in place for straight, true rows, and allows pin-point adjustment of cultivator sweep.

• Rugged gang construction features reinforced connection points for long life.

• Optimized tool spacing.

• Maximum trash and soil flow between tillage components is based on many years of field experience.

• Only one grease zerk per row. Greasing interval is once each operating season.

• 3/4” Diameter Pivot Bolts

• Polymer wear bushings keep the linkage assembly tight and do not require grease.

• U-Bolt mounted clamps give more vertical travel.

• Wrap-around clamp keeps gang straight and prevents “walking” in side-draft

• conditions, and moves the gang forward, making the unit easier to lift.

• 1-1/8” Arbor Bolt

• Two heavy 208 series sealed ball bearings with triple-lip seals in each coulter hub.

• Adjust coulter depth with easy adjusting handle.

• Front 18×8.5×8 8-ply tire provides positive depth control.

• Four-hole hub equipped w/2 triple-lip sealed ball bearings.

• 1-1/8” Arbor Bolt

• Two heavy 208 series sealed ball bearings with triple-lip seals in each coulter hub.

• Available in fixed or swivel.

• Peel weeds away from young, tender crops or hill dirt into the root base of more mature crops.

• Compound angle settings allow you to pitch the cutting edge away from the crop to prevent root pruning.

• Adjustable side-to-side for any row width, front-to-back to match sweep placement, up and down for desired protection

• Set fenders to control flow for maximum protection or raise to push soil into the base of the crop.

• Parallel link collision protection.

• Adjustable foot piece offers friction trip protection.

• Mount Sweep for clean-out and cultivating operations or mount buster for lister operations.

• Builds and shapes beds.

• Adjusts to vary bed height.

• Undercuts weeds and pushes dirt onto base of mature plants.

• Clears furrows for efficient irrigation flow.

• Height adjustable 1×3 or 1×4 shank, cut from high-strength material to withstand deep soil penetration. Standard fertilizer tubes for liquid fertilizer application.

• 1×3 shank scarfed on soil edge and equipped with chromium carbide point.

• 1×4 shank features cast sharpened chromium carbide shin.