The 3D Tractors are available with a gear drive transmission with eight speeds in both forward and reverse directions. It includes a drivetrain built with heavy-duty components like those used in some John Deere utility tractors. These components ensure a rugged and durable machine.
The spiral bevel gear of the 3D machine is larger in diameter than comparable tractors.
Column-mounted forward and reverse lever for increased efficiency and comfort when changing directions.
Fender-mounted gear shift lever for more comfortable shifting
The tractor will only start with the forward/reverse, range, and gear shift levers in neutral.
The engine will shut off if the operator leaves the seat unless the forward/reverse, range, and gear shift levers are in neutral.
The engine will shut off if the operator leaves the seat and the power take-off (PTO) is engaged.
Key John Deere advantage - A column-mounted forward/reverse lever is a more ergonomic alternative to the floor-mounted design of the competition. Having controls at the operator’s fingertips allows for an effortless change in directions at any time.
The 3D is much easier and more comfortable to operate when shifting between gears. The fender-mounted gear shift lever provides the ideal location and placement for the operator’s arm.
Clean and simple operator station is comfortable and convenient
An uncluttered design gives operators of all sizes plenty of room to be comfortable. Color-coded controls are located on either side of the operator.
All 3D Series Tractors come standard with a fuel gauge that is easy to read from the operator's station to ensure operators do not run out of fuel. The fuel tank is also located on the rear of the tractor to allow for easy refill.
Photos
Highlights
Rayville, Louisiana
New
002481
2022
John Deere
3 Series 3043D
1PY3043DKMB002481
Model: 3TNV86CT-KJPT
43
8F/8R synchromesh shuttle shift gear transmission | gear ranges: Four gears and two ranges
Diesel
Available
Specifications
2022
John Deere
3 Series
3043D
Compact
Model: 3TNV86CT-KJPT
SAE J1995 rated power: 41.6 hp (31 kW)
42.2 PS at 2800 rpm
Yanmar®
High pressure common rail direct injection
Turbocharged
Final Tier 4
Three | Cast-in-block
95.8 cu in. (1.57 L)
3.39 in (86 mm)
3.54 in. (90 mm)
19.1:1
Pressurized
Liquid
Dual element
At rated speed: 78 lb-ft (105.7 Nm)
High pressure common rail direct injection
Power take-off (PTO) power: 36.3 hp (27.1 kW) | At 2400 rpm: 540 rpm
Control: Mechanical
Spur gear
8F/8R synchromesh shuttle shift gear transmission | gear ranges: Four gears and two ranges